Have you encountered a problem like this? After showering and turning off the shower, it also drips out of the water. Sometimes it’s been turned off for a long time, and suddenly it’s flowing out, but every time it’s gone, it doesn’t flow.

Some people say that it is a shower quality problem, and some people say that it is a shower hose problem..... What is the purpose of dripping water after the shower is closed?

That is because after the use, the pressure inside the shower and the atmospheric pressure are in equilibrium, so the water inside will not flow out for a while, and will flow out after losing the balance for a while.

If it is closed, it will stop after a while. This is normal; because there are water in the water pipes and showers, after the shutdown, there is no flow, so it will drop for a while. If it is dripping after closing, it means that the switch valve is damaged or it is not closed by itself. This is a problem with large top spray showers. It is not that the shower leaks or is broken. Therefore, you can rest assured that you will encounter this problem. If it is continuous dripping, it is the quality problem.

Analysis of the cause of water leakage

There are several reasons for the leakage of the shower:

1. Shower plug problem

The bathing nozzle takes a long time, and the amount of water will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits in the water outlet hole, causing the shower to block.

Ketai uses high-quality, flexible silicone water spouts. The rubber material is soft and comfortable to touch, and it is not easy to scale. It is easy to clean. Just rub the rubber particles with your fingers, you can easily smash and eject the scale, making cleaning easier.

In addition, Ketai's one-button automatic descaling and self-cleaning shower, the water outlet is exposed, making the water more natural, the descaling is more convenient and convenient, the small buttons on the shower are designed with a single push, the internal crochet It will be exposed, and the scale will be washed out with the water flow to achieve the effect of automatic descaling.

2. Shower plating problem

It is very difficult to see the paint on the shower. The problem of the shower that has just been bought not only affects the appearance, but also some of the poor quality showers will be blocked by the paint.

Ketai showers are rigorously selected, and the surface is polished by fine mirrors, then thickened with copper plating, nickel plating and chrome plating to form a strong and effective protective layer. The coating does not fade or wear, and it is always new; Not afraid of scraping; easy to clean, ordinary household cleaning agent can be, no rust.

3. Material problems

The material is very critical. Inferior materials will reduce the life of the shower; cast iron showers are extremely rusting. It looks ugly, but it also blocks the water outlet, and the whole shower is broken.

Ketai showers are made of ABS, copper and 304 stainless steel, which are wear-resistant, corrosion-resistant and high-temperature resistant. They are the most suitable materials for making showers. We always insist on starting from every detail, each product has undergone rigorous quality inspection, superior craftsmanship, excellence, and strive to make every product perfect.

How to solve the problem of water leakage

1. Leakage of the shower head to the ball

Solution: First, unscrew the shower head from the steering ball ring, find the O-ring inside or a similar seal and replace it, then turn the shower head back into place.

2. Leakage occurs at the shower head handle connection

Solution: Select the appropriate shower hose and faucet according to the specifications, and replace the rubber ring and reinstall it.

3. Sand or sediment in the shower head

Solution: Rotate the shower head to clean it. If necessary, soak the parts with vinegar and scrub the parts. Be careful to avoid scratching them.

If the shower head is adjustable spray type, carefully inspect all movable parts to see if there is excessive wear marks; if the rotary handle does not move smoothly, or if the internal cam is broken, the entire shower head needs to be replaced.

4. The shower head becomes fine and fine

Solution: Turn the shower head to adjust. If it is not enough, open a small round cap in the middle of the shower head with a screwdriver, open the shower head and rinse it with water, then install and restore.

Shower maintenance tips

First, for regular cleaning, white vinegar can be used to soak and clean the shower surface and the interior, and then use cotton cloth to wipe the water outlet of the shower. This will not only reduce the impact of scale on the shower, but also play a role in sterilization.

Second, for the plating surface of the shower, you can use the flour to wipe regularly, then rinse with water, so that the surface of the shower can be bright and new.

Third, when cleaning scale, remember not to use strong acid to clean, otherwise it will easily corrode the shower surface.

4. Do not disassemble and maintain the shower to prevent damage to the appearance or internal structure of the shower.

Fifth, the daily use of showers should not exceed 70 ° C, otherwise it is easy to reduce the life of the shower, therefore, the installation of the shower should be as far away as possible from the electrical heat source.

Shower hose leaking reason

1. Improper installation, or deformation of the rubber ring, uneven or too thin outlet pipe joint, hose and shower do not match

Maintenance method: Select the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall. After this operation, the leakage of the shower hose will be controlled.

2. The hose is broken.

Repair method: Replace the new hose. How to replace the shower hose? First, replace the old hose and screw the flower hose from the shower head and the faucet by hand. Then replace it with a new shower hose, screw it on the other end of the shower and screw it on the tap, and screw it on.

3. Improper adjustment, or excessive foreign matter scale inside the hose.

Maintenance method: Turn the shower head to adjust it. If it still doesn't work, open a small round cap in the middle of the shower head with a small flat-blade screwdriver, use a Phillips screwdriver to screw down the screw, open the shower, rinse with a water brush, brush the shower hole, and then install the restore.

Shower hose maintenance tips

First of all, everyone should keep the metal hose in a natural stretch when showering. After use, insert the shower head on the shelf. Never wind the metal hose around the shower faucet.

Secondly, when pulling the hose, it is necessary to prevent the hose and the valve body joint from forming a dead knot. Be sure to look at it carefully. When pulling the hose, the force should be lighter, so as to avoid the metal hose being broken or the hose. Cause damage.

It is very important to choose a suitable maintenance method. It is naturally more important to choose a bathroom product that suits you. Choose the products of Gubide bathroom to make your home life easy and convenient.